TC4469集成電路（IC）的柵極驅動器規格書PDF中文資料

TC4469屬于集成電路（IC）的柵極驅動器。由微芯科技股份有限公司制造生產的TC4469柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。

GENERAL DESCRIPTION

The TC446X family of four-output CMOS buffer/drivers are an expansion from our earlier single- and dual-output drivers. Each driver has been equipped with a two-input logic gate for added flexibility.

The TC446X drivers can source up to 250 mA into loads referenced to ground. Heavily loaded clock lines, coaxial cables, and piezoelectric transducers can all be easily driven with the 446X series drivers. The only limitation on loading is that total power dissipation in the IC must be kept within the power dissipation limits of the package.

The TC446X series will not latch under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (either polarity) occurs on the ground line. They can accept up to half an amp of inductive kickback current (either polarity) into their outputs without damage or logic upset. In addition, all terminals are protected against ESD to at least 2000V.

FEATURES

■ High Peak Output Current ............................... 1.2A

■ Wide Operating Range ............................ 4.5 to 18V

■ Symmetrical Rise and Fall Times ................ 25nsec

■ Short, Equal Delay Times ............................ 75nsec

■ Latchproof! Withstands 500mA Inductive Kickback

■ 3 Input Logic Choices

— AND / NAND / AND + Inv

■ 2kV ESD Protection on All Pins

APPLICATIONS

■ General-Purpose CMOS Logic Buffer

■ Driving All Four MOSFETs in an H-Bridge

■ Direct Small Motor Driver

■ Relay or Peripheral Drivers

■ CCD Driver

■ Pin-Switching Network Driver