TC7QPB9306FK集成電路（IC）的信號開關多路復用器解碼器規(guī)格書PDF中文資料

1. Functional Description

? Low-Voltage, Low-Power 4-Bit Dual-Supply Bus Switch

2. General

The TC7QPB9306FK and TC7QPB9307FK are CMOS 4-bit dual-supply bus switches that can provide an interface

between two nodes at different voltage levels. These devices can be connected to two independent power supplies.

VCCA supports 1.8 V, 2.5 V and 3.3 V power supplies, whereas VCCB supports 2.5 V, 3.3 V and 5.0 V power supplies.

Bidirectional level-shifting is possible by simply adding external pull-up resistors between the An/Bn data lines

and the VCCA / VCCB supplies. There is no restriction on the relative magnitude of the An and Bn voltages; both

the An and Bn data lines can be pulled up to arbitrary power supplies.

The enable signal can be used to disable the device so that the buses are effectively isolated.

The Output Enable (OE:TC7QPB9306FK, OE:TC7QPB9307FK) input is common for all the 4-bits of the data

lines; thus these device are used as a single 4-bits bus switch. For the TC7QPB9306FK, Output Enable (OE) is

active-High: When OE is High, the switch is on; when Low, the switch is off. For the TC7QPB9307FK, Output

Enable (OE) is active-Low: When OE is Low, the switch is on; when High, the switch is off.

The TC7QPB9306FK and TC7QPB9307FK support power-down protection at the OE, OE input, with OE, OE

being 5.5 V tolerant.

The channels consist of n-type MOSFETs.

All the inputs provide protection against electrostatic discharge.

3. Features

(1) Operating voltage: 1.8 V to 2.5 V / 1.8 V to 3.3 V / 1.8 V to 5.0 V / 2.5 V to 3.3 V / 2.5 V to 5.0 V /

3.3 V to 5.0 V bidirectional interface

(2) Operating voltage: VCCA = 1.65 to 5.0 V, VCCB = 2.3 to 5.5 V

(3) Low ON-resistance: RON = 8.0 Ω (Max) @ VIS = 0 V, IIS = 30 mA, VCCA = 3.0 V, VCCB = 4.5 V

(4) 5.5 V tolerance and power-down protection at the Output Enable input.

(5) Packages: VSSOP14 (US14)