TDE1707BFP集成電路（IC）的配電開關(guān)負(fù)載驅(qū)動器規(guī)格書PDF中文資料

DESCRIPTION

The TDE1707BFP is a 0.5A Integrated Power Switch with up to 48V Power supply capability.

Two output configurations are possible:

- Load to Gnd. (High Side Mode)

- Load to VS (Low side Mode)

Especially dedicated to proximity detectors, its internal +5V supply can be used to supply external circuits (See also AN495/0692). A signal is internally generated to block the In signal, and prevent activation of the output switch, as long as an abnormal condition is detected. The power-on transition, as well as the chip overtemperature and the output overcurrent, concurr to the generation of such signal. A minimum delay of 25μs (Typ. value) is added to the trailing edge of such signal to ensure that a stable normal situation is present when the signal disappears. The delay (of the disapperance of the block signal; no delay at its on set) can be further increased connecting a capacitor between pin3 and ground. It can drive resistive or inductive loads.

■ 0.5A OUTPUT CURRENT

■ LOW SIDE OR HIGH SIDE SWITCH CONFIGURATION

■ 6V TO 48V SUPPLY VOLTAGE RANGE

■ OVERLOAD AND SHORT CIRCUIT PROTECTIONS

■ INTERNAL VOLTAGE CLAMPING

■ SUPPLY AND OUTPUT REVERSAL PROTECTION

■ THERMAL SHUTDOWN

■ GND AND VS OPEN WIRE PROTECTION

■ ADJUSTABLE DELAY AT SWITCH ON

■ INDICATOR STATUS LED DRIVER

■ +5V REGULATED AUX. VOLTAGE

■ HIGH BURST IMMUNITY