GENERAL DESCRIPTION

The TJA1050 is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.

The TJA1050 is the third Philips high-speed CAN transceiver after the PCA82C250 and the PCA82C251. The most important differences are:

? Much lower electromagnetic emission due to optimal matching of the output signals CANH and CANL

? Improved behaviour in case of an unpowered node

? No standby mode.

This makes the TJA1050 eminently suitable for use in nodes that are in a power-down situation in partially powered networks.

FEATURES

? Fully compatible with the “ISO 11898” standard

? High speed (up to 1 Mbaud)

? Very low ElectroMagnetic Emission (EME)

? Differential receiver with wide common-mode range for high ElectroMagnetic Immunity (EMI)

? An unpowered node does not disturb the bus lines

? Transmit Data (TXD) dominant time-out function

? Silent mode in which the transmitter is disabled

? Bus pins protected against transients in an automotive environment

? Input levels compatible with 3.3 V and 5 V devices

? Thermally protected

? Short-circuit proof to battery and to ground

? At least 110 nodes can be connected.

TJA1050T屬于集成電路（IC） > 驅動器，接收器，收發器。恩智浦半導體公司制造生產的TJA1050T驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。