TL230A5工業(yè)自動(dòng)化與控制的延時(shí)繼電器規(guī)格書PDF中文資料

Description

The TL Series provides protection against short cycling of a

compressor. At the end of each operation, or whenever power

is lost, a lockout delay is initiated. This lockout delay prevents

restarting of the compressor until the head pressure has

equalized. Compressor relay chatter due to thermostat bounce

is eliminated by use of optional one second delay-on-make. The

TL Series should not be used with cooling anticipator resistors

or solid-state switches. (See the TA Series).

Operation (Lockout)

Lockout: On initial closure of S1, the compressor relay energizes

immediately (or after an optional 1s delay). When the S1 opens

or input voltage is interrupted, the output opens and remains

open for the lockout time delay. During this lockout time delay

period, the compressor relay cannot be re-energized.

Reset: The lockout time delay cannot be reset. After the time

delay is completed, the unit automatically resets.

Features & Benefits

FEATURES BENEFITS

Lockout delay

Prevents rapid cycling of compressor and eliminates

nuisance service calls due to blown fuse or tripped

breaker by locked rotor during short cycling.

One second

Delay-on-Make

models ending in T)

Eliminates contactor chatter due to

thermostat bounce

Totally solid state

encapsulated

No moving parts to arc and wear out over time and

encapsulated to protect against shock, vibration,

and humidity

steady, 10A inrush,

solid state output Provides 100 million operations in typical conditions