TMS320F280039C_V06中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? TMS320C28x 32-bit DSP core at 120 MHz

– IEEE 754 Floating-Point Unit (FPU)

? Support for Fast Integer Division (FINTDIV)

– Trigonometric Math Unit (TMU)

? Support for Nonlinear Proportional Integral

Derivative (NLPID) control

– CRC Engine and Instructions (VCRC)

– Ten hardware breakpoints (with ERAD)

? Programmable Control Law Accelerator (CLA)

– 120 MHz

– IEEE 754 single-precision floating-point

instructions

– Executes code independently of main CPU

? On-chip memory

– 384KB (192KW) of flash (ECC-protected)

across three independent banks

– 69KB (34.5KW) of RAM (ECC-protected)

– Dual-zone security

– Secure Boot and JTAG Lock

? Clock and system control

– Two internal 10-MHz oscillators

– Crystal oscillator or external clock input

– Windowed watchdog timer module

– Missing clock detection circuitry

– Dual-clock Comparator (DCC)

? 3.3-V I/O design

– Internal VREG generation allows for singlesupply

design

– Brownout reset (BOR) circuit

? System peripherals

– 6-channel Direct Memory Access (DMA)

controller

– 55 individually programmable multiplexed

General-Purpose Input/Output (GPIO) pins

– 23 digital inputs on analog pins

– 2 digital inputs/outputs on analog pins (AGPIO)

– Enhanced Peripheral Interrupt Expansion

(ePIE)

– Multiple low-power mode (LPM) support

– Embedded Real-time Analysis and Diagnostic

(ERAD)

– Unique Identification (UID) number

? Communications peripherals

– One Power-Management Bus (PMBus)

interface

– Two Inter-integrated Circuit (I2C) interfaces

– One Controller Area Network (CAN/DCAN) bus

port

– One Controller Area Network with Flexible

Data-Rate (CAN FD/MCAN) bus port

– Two Serial Peripheral Interface (SPI) ports

– Two UART-compatible Serial Communication

Interface (SCI)

– Two UART-compatible Local Interconnect

Network (LIN) interfaces

– Fast Serial Interface (FSI) with one transmitter

and one receiver (up to 200Mbps)

? Analog system

– Three 4-MSPS, 12-bit Analog-to-Digital

Converters (ADCs)

? Up to 23 external channels (includes the two

gpdac outputs)

? Four integrated Post-Processing Blocks

(PPB) per ADC

– Four windowed comparators (CMPSS) with

12-bit reference Digital-to-Analog Converters

(DACs)

? Digital glitch filters

– Two 12-bit buffered DAC outputs

? Enhanced control peripherals

– 16 ePWM channels with eight channels

that have high-resolution capability (150-ps

resolution)

? Integrated dead-band support

? Integrated hardware trip zones (TZs)

– Three Enhanced Capture (eCAP) modules

? High-resolution Capture (HRCAP) available

on one of the three eCAP modules

– Two Enhanced Quadrature Encoder Pulse

(eQEP) modules with support for CW/CCW

operation modes

– Eight Sigma-Delta Filter Module (SDFM) input

channels (two parallel filters per channel)

? Standard SDFM data filtering

? Comparator filter for fast action for

overvalue or undervalue condition

– Embedded Pattern Generator (EPG)

? Configurable Logic Block (CLB)

– 4 tiles

– Augments existing peripheral capability

– Supports position manager solutions

? Host Interface Controller (HIC)

– Access to internal memory from an external

host

? Background CRC (BGCRC)

– One cycle CRC computation on 32 bits of data

? Advanced Encryption Standard (AES) accelerator

? Live Firmware Update (LFU)

– Fast context switching from old to new firmware

– Flash bank erase time improvements

? Diagnostic features

– Memory Power On Self Test (MPOST)

– Hardware Built-in Self Test (HWBIST)

? Functional Safety-Compliant targeted

– Developed for functional safety applications

– Documentation available to aid ISO 26262 and

IEC 61508 system design

– Systematic capability up to ASIL D and SIL 3

targeted

– Hardware capability up to ASIL B and SIL 2

targeted

? Safety-related certification

– ISO 26262 certification up to ASIL B and SIL 2

by TüV SüD planned

? Package options:

– 100-pin Low-profile Quad Flatpack (LQFP)

[PZ suffix]

– 80-pin Low-profile Quad Flatpack (LQFP)

[PN suffix]

– 64-pin (LQFP) [PM suffix]

– 48-pin (LQFP) [PT suffix]

? Temperature options:

– Free-air (TA): –40°C to 125°C

– Junction (TJ): –40°C to 150°C

2 Applications

? Appliances

– Air conditioner outdoor unit

? Building automation

– Door operator drive control

? Industrial machine & machine tools

– Automated sorting equipment

– Textile machine

? AC inverter & VF drives

– AC drive control module

– AC drive position feedback

– AC drive power stage module

? Linear motor transport systems

– Linear motor power stage

? Single & multi axis servo drives

– Servo drive position feedback

– Servo drive power stage module

? Speed controlled BLDC drives

– AC-input BLDC motor drive

– DC-input BLDC motor drive

? Factory automation

– Robot servo drive

– Mobile robot motor control

– Position sensor

? Industrial power

– Industrial AC-DC

? UPS

– Three phase UPS

– Single phase online UPS

? Telecom & server power

– Merchant DC/DC

– Merchant network & server PSU

– Merchant telecom rectifiers

? Hybrids, electric & powertrain systems

– DC/DC converter

– Inverter & motor control

– On-board (OBC) & wireless charger

– Virtual engine sound system (VESS)

– Engine fan

– eTurbo/charger

– Pump

– Electric power steering (EPS)

? Infotainment and cluster

– Head-up display

– Automotive head unit

– Automotive external amplifier

? Body electronics & lighting

– Automotive HVAC compressor module

– DC/AC inverter

– Headlight

? ADAS

– Mechanically scanning LIDAR

? HEV/EV battery-management system (BMS)

– 100-V battery pack-passive balancing

– 12- & 24-V battery pack-passive balancing

– 400-V battery pack-passive balancing

– 48-V battery pack-passive balancing

? EV charging infrastructure

– AC charging (pile) station

– DC charging (pile) station

– EV charging station power module

– Wireless EV charging station

? Renewable energy storage

– Energy storage power conversion system

(PCS)

? Solar energy

– Central inverter

– Micro inverter

– Solar power optimizer

– Solar arc protection

– Rapid shutdown

– String inverter

3 Description

The TMS320F28003x (F28003x) is a member of the C2000? real-time microcontroller family of scalable, ultralow

latency devices designed for efficiency in power electronics, including but not limited to: high power density,

high switching frequencies, and supporting the use of GaN and SiC technologies.

These include such applications as:

? Motor drives

? Appliances

? Hybrid, electric & powertrain systems

? Solar & EV charging

? Digital power

? Body electronics & lighting

? Test & measurement

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 120 MHz of signalprocessing

performance for floating- or fixed-point code running from either on-chip flash or SRAM. The

C28x CPU is further boosted by the Floating-Point Unit (FPU), Trigonometric Math Unit (TMU), and VCRC

(Cyclical Redundancy Check) extended instruction sets, speeding up common algorithms key to real-time control

systems.

The CLA allows significant offloading of common tasks from the main C28x CPU. The CLA is an independent

32-bit floating-point math accelerator that executes in parallel with the CPU. Additionally, the CLA has its own

dedicated memory resources and it can directly access the key peripherals that are required in a typical control

system. Support of a subset of ANSI C is standard, as are key features like hardware breakpoints and hardware

task-switching.

The F28003x supports up to 384KB (192KW) of flash memory divided into three 128KB (64KW) banks, which

enable programming and execution in parallel. Up to 69KB (34.5KW) of on-chip SRAM is also available to

supplement the flash memory.

The Live Firmware Update hardware enhancements on F28003x allow fast context switching from the old

firmware to the new firmware to minimize application downtime when updating the device firmware.

High-performance analog blocks are integrated on the F28003x real-time microcontroller (MCU) and are closely

coupled with the processing and PWM units to provide optimal real-time signal chain performance. Sixteen PWM

channels, all supporting frequency-independent resolution modes, enable control of various power stages from a

3-phase inverter to power factor correction and advanced multilevel power topologies.

The inclusion of the Configurable Logic Block (CLB) allows the user to add custom logic and potentially integrate

FPGA-like functions into the C2000 real-time MCU.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, PMBus,

LIN, CAN and CAN FD) and offers multiple pin-muxing options for optimal signal placement. The Fast Serial

Interface (FSI) enables up to 200Mbps of robust communications across an isolation boundary.

New to the C2000 platform is the Host Interface Controller (HIC), a high-throughput interface that allows an

external host to access the resources of the TMS320F28003x directly.

Want to learn more about features that make C2000 Real-Time MCUs the right choice for your real-time control

system? Check out The Essential Guide for Developing With C2000? Real-Time Microcontrollers and visit the

C2000? real-time control MCUs page.

The Getting Started With C2000? Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all

aspects of development with C2000 devices from hardware to support resources. In addition to key reference

documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD280039C evaluation board and download C2000Ware.