TPS16412中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Operating voltage range (IN):

– TPS16410, TPS16411: 4.5 V to 40 V

– TPS16412, TPS16413: 2.7 V to 40 V

? Withstands negative voltages up to –1 V at output

? Ultra-low on-resistance: RON = 152 mΩ (typ.)

? TPS16410, TPS16411: 2 to 64-W power limiting

? TPS16412, TPS16413: 0.03 to 1.8-A current

limiting

? IN to OUT short detection and indication on FLT

pin

? FLT output for diagnostics and driving external

PFET

? ±5 accurate power limit at 15 W (TPS16410,

TPS16411)

? ±6 accurate current limit at 1 A (TPS16412,

TPS16413)

? Configurable overvoltage protection

? Configurable overcurrent protection (IOCP)

? Configurable blanking time for transient currents

? Overvoltage protection up to 60 V with external

FET

? Adjustable output slew rate control (dVdt) for

inrush current protection

? Enable and shutdown control

? Output load current monitoring on IOCP pin

? Overtemperature Protection (OTP) with thermal

shutdown

? Small footprint: QFN 3 × 3 mm, 0.5-mm pitch

2 Applications

? Refrigerator and freezer

? Oven

? Dishwasher

? HVAC valve and actuator control

? Ventilators

? Anesthesia delivery systems

3 Description

The TPS1641x is an integrated eFuse with accurate

power limit or current limit. The device provides robust

protection with integrated overcurrent protection,

overvoltage protection, IN to OUT short detection and

overtemperature protection.

TPS16410 and TPS16411 devices provide ±5

power limiting at 15 W for loads and it also provides

configurable blanking time for transient overload or

overcurrent events. TPS16410 and TPS16411 can be

used for low power circuits (LPCs) for 15-W power

limiting as per IEC60335 and UL60730 standards.

TPS1641x devices provide protection from adjacent

pin short and pin short to GND faults.

Applications such as backplane power protection in

PLC and DCS modules configure the current limit with

a resistor on the ILIM pin. TPS16412 and TPS16413

devices provide ±6 current limiting at 1 A for loads

and these devices also provide output slew rate

control with dVdT pin to charge large capacitive loads

at power up.

TPS1641x features IN to OUT short detection. The

device indicates IN to OUT short on the FLT pin. The

FLT pin can be either provided to MCU as digital input

or it can be used to drive an external PFET.

The devices are characterized for operation over a

junction temperature range of –40°C to +125°C.