TPS1HTC30-Q1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Single-channel smart high-side power switch for

24-V automotive systems with full diagnostics

? Wide operating voltage range: 6 V to 60 V

– OVP protection: 66 V

? Low RON: 30-mΩ typical, 55-mΩ maximum

? Low standby current: < 0.5 μA

? Low quiescent current (Iq): < 2 mA

? Improve system level reliability through adjustable

current limiting

– Current limit: 2 A –16 A

? Accurate current sensing: ±4 at 1 A

? Protection

– Overload and short-circuit protection

– Integrated inductive discharge clamp

– Undervoltage lockout (UVLO) protection

– Loss of GND, loss of supply protection

– Reverse battery protection with external

components

? Diagnostics

– On and off state output open-load and short-tobattery

detection

– Overload and short to ground detection

– Absolute and relative thermal shutdown

detection

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? Operating junction temperature: –40 to 125°C

? Input control: 1.8-V, 3.3-V and 5-V logic compatible

? Integrated fault sense voltage scaling for ADC

protection

? Qualifications

– AEC-Q100 qualified for automotive applications

? Temperature grade 1: –40°C to +125°C, TA

? 14-pin thermally-enhanced TSSOP package

2 Applications

? General resistive, inductive, and capacitive loads

3 Description

TPS1HTC30-Q1 is a single-channel, smart high-side

switch, with integrated NMOS power FET and charge

pump, designed to meet the requirements of 24-V

automotive battery systems. The low RON(30 mΩ)

minimizes device power dissipation driving a wide

range of output load current up to 6-A DC, and the 60-

V DC operating range improves system robustness.

The device integrates protection features such as

thermal shutdown, output clamp, and current limit.

These features improve system robustness during

fault events such as short circuit. TPS1HTC30-Q1

implements an adjustable current limiting circuit that

improves the reliability of the system by reducing

inrush current when driving large capacitive loads

and minimizing overload current. The device also

provides an accurate load current sense that allows

for improved load diagnostics such as overload

and open-load detection enabling better predictive

maintenance.

TPS1HTC30-Q1 is available in a small 14-pin, 4.40-

mm × 5.0-mm HTSSOP leaded package with 0.65-

mm pin pitch minimizing the PCB footprint.