TPS37AB7806FDSKRQ1集成電路（IC）的監控器規格書PDF中文資料

TPS37AB7806FDSKRQ1屬于集成電路（IC）的監控器。由德州儀器制造生產的TPS37AB7806FDSKRQ1監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。

1 Features

? AEC-Q100 qualified with the following results:

– Device temperature grade 1: –40°C to +125°C

ambient operating temperature TA

– Device HBM ESD classification level 2

– Device CDM ESD classification level C7B

? Wide supply voltage range: 2.7 V to 65 V

? SENSE and RESET pins are 65 V graded

? Low quiescent current: 1 μA (typical)

? Flexible and wide voltage threshold options

Table 13-1

– 2.7 V to 36 V (1.5 maximum accuracy)

– 800 mV option (1 maximum accuracy)

? Built-in hysteresis (VHYS)

– Percentage options: 2 to 13 (1 steps)

– Fixed options: VTH < 8 V = 0.5 V, 1 V, 1.5 V,

2 V, 2.5 V

? Programmable reset time delay

– 10 nF = 12.8 ms, 10 μF = 12.8 s

? Programmable sense time delay

– 10 nF = 1.28 ms, 10 μF = 1.28 s

? Manual Reset (MR) feature

? Output reset latching feature

? Output topology: Open-Drain or Push-Pull

2 Applications

? Telematics control unit

? Emergency call system

? Audio amplifier

? Head unit and cluster

? Sensor fusion and cameras

? Body control module

3 Description

The TPS37-Q1 is a 65 V input voltage detector with

1 μA IDD, 1 accuracy, and with a fast 10 μs detection

time. This device can be connected directly to

12 V / 24 V automotive battery system for continuous

monitoring of over (OV) and under (UV) voltage

conditions; with its internal resistor divider, it offers the

smallest total solution size. Wide hysteresis voltage

options are available to ignore cold crank, start-stop

and various car battery voltage transients. Built-in

hysteresis on the SENSE pins prevents false reset

signals when monitoring a supply voltage rail.

The separate VDD and SENSE pins allow

redundancy sought by high-reliability automotive

systems and SENSE can monitor higher and lower

voltages than VDD. Optional use of external resistors

are supported by the high impedance input of the

SENSE pins. CTSx and CTRx pins allow delay

adjustability on the rising and falling edges of the

RESET signals. Also, CTSx functions as a debouncer

by ignoring voltage glitches on the monitored voltage

rails; CTRx operates as a manual reset (MR) that can

be used to force a system reset.

TPS37-Q1 is available in WSON or SOT-23 package.

The WSON package has wettable flanks allowing

the facilitation for Automatic Optical Inspection (AOI)

and low resolution X-ray inspection. The central pad

is non-conductive to increase the creepage between

VDD and GND per guidelines in IEC60664.