TPS715A33DRBR集成電路（IC）的線性+開關穩壓器規格書PDF中文資料

TPS715A33DRBR屬于集成電路（IC）的線性+開關穩壓器。由德州儀器制造生產的TPS715A33DRBR穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。

1 Features

? Input voltage range:

– 2.5 V to 24 V

? Available output voltage options:

– Fixed: 1.8 V to 5 V

– Adjustable: 1.205 V to 15 V

? Output current: Up to 80 mA

? Very low IQ: 3.2 μA at 80-mA load current

? Overcurrent protection

? Package:

– 3-mm × 3-mm VSON (DRB)

– 2-mm × 2-mm WSON (DRV)

? Operating junction temperature: –40°C to +125°C

? For MSP430-specific output voltages see the

TPS715

2 Applications

? Home and building automation

? Retail automation and payment

? Grid infrastructure

? Medical applications

? Lighting applications

3 Description

The TPS715A low-dropout (LDO) linear voltage

regulator is a low quiescent current device that

offers the benefits of a wide input voltage range

and low-power operation in miniaturized packaging.

Thus, the TPS715A is designed for battery-powered

applications and as a power-management attachment

to low-power microcontrollers.

The TPS715A is available in both fixed and

adjustable versions. For more flexibility or higher

output voltages, the adjustable version uses external

feedback resistors to set the output voltage from

1.205 V to 15 V. The TPS715A LDOs support a low

dropout of 650 mV (typ) at 80 mA of load current.

The low quiescent current (3.2 μA typically) is stable

over the entire range of output load current (0 mA

to 80 mA). The TPS715A (new chip) also features

an internal soft-start to lower the inrush current. The

built-in overcurrent limit helps protect the regulator in

the event of a load short or fault.

The TPS715A is available in a 3-mm × 3-mm package

for use in high power dissipation applications and a

small 2-mm × 2-mm package for hand-held and ultraportable

applications. The 3-mm × 3-mm package is

also available as a non-magnetic package for medical

imaging applications.