TPS7A2050PDQNRM3中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Low output voltage noise: 7μVRMS

– No noise-bypass capacitor required

? High PSRR: 95dB at 1kHz

? Very low IQ: 6.5μA

? Input voltage range: 1.6V to 6.0V

? Output voltage range: 0.8V to 5.5V

? Output voltage tolerance: ±1.5% (max)

? Very low dropout:

– 140mV (max) at 300mA (VOUT = 3.3V)

– 145mV (max) at 300mA (VOUT = 3.3V, DBV)

? Low inrush current

? Smart enable pulldown

? Stable with 1μF minimum ceramic output capacitor

? Packages:

– 1mm × 1mm X2SON (DQN)

– 0.616mm × 0.616mm DSBGA (YCK)

– 0.612mm × 0.612mm DSBGA (YCJ)

– 2.9mm × 2.8mm SOT23-5 (DBV)

2 Applications

? Smartphones and tablets

? IP network cameras

? Portable medical equipment

? Smart meters and field transmitters

? Motor drives

? Wearables

3 Description

The TPS7A20 is an ultra-small, low-dropout (LDO)

linear regulator that can source 300mA of output

current. The TPS7A20 is designed to provide low

noise, high PSRR, and excellent load and line

transient performance that can meet the requirements

of RF and other sensitive analog circuits. Using

innovative design techniques, the TPS7A20 offers an

ultra-low noise performance without the addition of a

noise bypass capacitor. The TPS7A20 also provides

the advantage of low quiescent current, which can be

ideal for battery-powered applications. With an input

voltage range of 1.6V to 6.0V and an output range of

0.8V to 5.5V, the TPS7A20 can be used for a wide

variety of applications. The device uses a precision

reference circuit to provide a maximum accuracy of

1.5% over load, line, and temperature variations.

The TPS7A20 features an internal soft-start to lower

the inrush current, thus minimizing the input voltage

drop during start up. The device is stable with

small ceramic capacitors, allowing for a small overall

solution size.

The TPS7A20 has a smart enable input circuit with an

internally controlled pulldown resistor that keeps the

LDO disabled even when the EN pin is left floating

and helps eliminate the external components used to

pulldown the EN pin.