TPT29546中文資料思瑞浦數(shù)據(jù)手冊PDF規(guī)格書

Features

? Bidirectional Translator of 1:4 I

2C Switch

? Active-Low Reset Input

? Two Address Terminals, Allowing up to Four

Devices on the I

2C Bus

? Operating Power-Supply Voltage Range of 2.3 to

5.5V

? Allow Voltage-Level Translation among 2.5V,

3.3V, and 5V Buses

? Support Standard Mode and Fast Mode I

2C

Devices，0 to 400 kHz Clock Frequency

? Low RON Switches

? Latch-Up Performance Exceeds 200 mA per

JESD 78

? ESD Protection Exceeds JESD 22

? ±4000V Human-Body Model

? ±1500V Charged-Device Model

Applications

? Servers/Storages

? Routers (Telecom Switching Equipment)

? Factory Automation

? Products with I

2C Slave Address Conflicts

(e.g. Multiple, Identical Temp Sensors)

Description

The TPT29546 is a 1:4 bidirectional translating I

2C

switch. The SCL/SDA upstream pair fans out to four

downstream channels. Any single SCn/SDn channel

or combination of channels can be selected,

determined by the programmable control register.

If one of the downstream I

2C buses is stuck in a low

state, then an active-low reset (RESET) input helps

the TPT29546 to recover. Pulling RESET low resets

the I

2C state machine and causes all the channels to

be deselected, as does the internal power-on reset

function.

The pass gates of the switches are constructed such

that the VCC terminal can be used to limit the

maximum high voltage, which will be passed by the

TPT29546. This allows the use of different bus

voltages on each pair, so that 2.5V, or 3.3V parts can

communicate with 5V parts, without any additional

protection. External pull-up resistors pull the bus up

to the desired voltage level for each channel. All I/O

terminals are 5.5 V tolerant.

TPT29546 is available in the TSSOP16 and SOP16

package, and is characterized from –40°C to +85°C.