Description

The TRS series combines an isolated, 8 A electromechanical,

relay output with digital timing circuitry. False trigger of the

TRS series by a transient is unlikely because of the complete

isolation of the circuit from the line prior to initiation. The

initiate contact is common to one side of the line and may be

utilized to operate other loads. Installation is easy due to the

TRS’s industry standard 8 or 11-pin plug-in base wiring.

Operation (Single Shot)

Input voltage must be applied to the input before and during

timing. Upon momentary or maintained closure of the initiate

switch (leading edge triggered), the output energizes for

a measured interval of time. At the end of the delay, the

output de-energizes. Opening or reclosing the initiate switch

during timing has no affect on the time delay. Applying input

voltage with the initiate switch closed will energize the load

and begin the time delay.

Reset: Reset occurs when the time delay is complete and

the initiate switch is opened. Loss of input voltage resets the

time delay and output.

FEATURES BENEFITS

Complete isolation

of circuit from line No false trip due to transients

Industry standard octal

plug connection Eliminates need for special connectors

Isolated, 8 A, SPDT

output contacts

Allows control of loads with independent

voltage sources

Digital circuitry Repeat accuracy +/- 2

TRS120A2X300屬于工業自動化與控制 > 延時繼電器。力特公司制造生產的TRS120A2X300延時繼電器延時繼電器是使用較小控制信號啟動或停止大負載的機電器件。這些器件內置有時間延遲來控制繼電器的觸發。功能包括間隔、關閉延遲、打開延遲、單次、可編程（多功能）、重復周期、雙定時器、信號開/關延遲和 Star/Delta 控制器。