TSB434工業(yè)自動(dòng)化與控制的延時(shí)繼電器規(guī)格書PDF中文資料

Description

The TSB Series is a totally solid-state, delay-on-break timing

module. The TSB series is available with a fixed, external, or

onboard adjustable time delay. Time delays from 0.05 to 600

seconds, in 4 standard ranges, cover over 90 of all OEM

and commercial appliance timing applications. The repeat

accuracy is ±2 . Operating voltages of 24, 120, or 230

V ac are available. The TSB’s 1 A steady state, 10 A rated,

solid-state output is perfect for direct control of solenoids,

contactors, relays, lamps, buzzers, and small heaters. The

TSB series can be surface mounted with a single screw, or

snapped on a 35 mm DIN rail using the P1023-20 adapter.

Operation (Delay-on-Break)

Input voltage must be applied before and during timing. Upon

closure of the initiate switch, the output energizes. The time

delay begins when the initiate switch opens. The output

remains energized during timing. At the end of the time

delay, the output de-energizes. The output will energize if the

initiate switch is closed when input voltage is applied.

Reset: Reclosing the initiate switch during timing resets the

time delay. Loss of input voltage resets the output and the

time delay.

FEATURES BENEFITS

Analog circuitry Repeat accuracy + / - 2 ,

Factory calibration + / - 5

Totally solid state

and encapsulated

No moving parts to arc and wear out over time

and encapsulated to protect against shock,

vibration, and humidity

Wide time delay range Meets almost all OEM and commercial

appliance timing applications

1A steady, 10A inrush

solid state output

Provides 100 million operations in typical

conditions