UCC21530QDWKQ1集成電路（IC）的柵極驅(qū)動(dòng)器規(guī)格書(shū)PDF中文資料

1 Features

? AEC-Q100 qualified with:

– Device temperature grade 1

? Functional Safety Quality-Managed

– Documentation available to aid functional safety

system design

? Universal: dual low-side, dual high-side or halfbridge

driver

? Wide body SOIC-14 (DWK) package

? 3.3mm spacing between driver channels

? Switching parameters:

– 33ns typical propagation delay

– 20ns minimum pulse width

– 6ns maximum pulse-width distortion

? Common-mode transient immunity (CMTI) greater

than 125V/ns

? 4A peak source, 6A peak sink output

? TTL and CMOS compatible inputs

? 3V to 18V input VCCI range

? Up to 25V VDD output drive supply

– 8V,12V and 17V VDD UVLO options

? Programmable overlap and dead time

? Junction temperature range –40 to +150°C

2 Applications

? HEV and BEV battery chargers

? Solar string and central inverters

? AC-to-DC and DC-to-DC charging piles

? AC inverter and servo drive

? AC-to-DC and DC-to-DC power delivery

? Energy storage systems

3 Description

The UCC21530-Q1 is an isolated dual-channel gate

driver with 4A source and 6A sink peak current. It

is designed to drive IGBTs, Si MOSFETs, and SiC

MOSFETs up to 5MHz.

The input side is isolated from the two output

drivers by a 5.7kVRMS reinforced isolation barrier,

with a minimum of 125V/ns common-mode transient

immunity (CMTI). Internal functional isolation between

the two secondary-side drivers allows a working

voltage of up to 1850V.

This device can be configured as two low-side drivers,

two high-side drivers, or a half-bridge driver with

programmable dead time (DT). The EN pin pulled low

shuts down both outputs simultaneously and allows

for normal operation when left open or pulled high. As

a fail-safe measure, primary-side logic failures force

both outputs low.

The device accepts VDD supply voltages up to 25V.

A wide input VCCI range from 3V to 18V makes the

driver suitable for interfacing with both analog and

digital controllers. All the supply voltage pins have

under voltage lock-out (UVLO) protection.