UPD168117A中文資料瑞薩數(shù)據(jù)手冊(cè)PDF規(guī)格書

DESCRIPTION

The μ PD168117A is a 7-channel H-bridge driver with a micro step function supporting pulse input that consists of a CMOS control circuit and a MOS output stage. It can reduce the current consumption and the voltage loss at the output stage compared with a conventional driver using bipolar transistors, thanks to employment of a MOS process. Moreover, at the μ PD168117A, micro step control of 128 divisions can perform stepping motor drive by the pulse input, and motor can be driven by low noise and low vibration.

The package is a 64-pin FLGA that helps reduce the mounting area and height.

The μ PD168117A can be used to drive two stepping motors, or two DC motors and one coil.

FEATURES

? Seven H-bridge circuits employing power MOS FET

? Low-voltage driving

VDD = 2.7 to 3.6 V

VM = 2.7 to 5.5 V

? Output on-state resistance:

1.0 ? TYP., 1.5 ? MAX. (sum of top and bottom stage, ch1 to ch4, and ch7)

1.5 ? TYP., 2.0 ? MAX. (sum of top and bottom stage, ch5 and ch6)

? PWM output (ch1 to ch6), linear output (ch7)

? Output current

DC current: 0.4 A/ch (when each channel is used independently)

Peak current: 0.7 A/ch (when each channel is used independently)

DC current: 0.5 A/ch (when used independently)

Peak current: 0.7 A/ch (when used independently)

? Input logic frequency: 150 kHz supported

? Under-voltage lockout circuit

Shuts down the internal circuit at VDD = 1.7 V TYP.

? Overheat protection circuit

Operates at 150°C or more and shuts down internal circuitry.

? Mounted on 64-pin FLGA (□6 mm, 0.65 mm pitch)