USB-RS232-CC-LLLL-CU-PWR中文資料飛特帝亞數(shù)據(jù)手冊PDF規(guī)格書

Features

- USB-RS232 converter cable provides a USB to RS232 serial interface with customised end connectors.

- Entire USB protocol handled by the electronics in the cable USB.

- EIA/TIA-232 and V.28/V.24 communication interface with low power requirements.

- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.

- Internal EEPROM with user writeable area.

- FTDI’s royalty-free VCP allow for communication as a standard emulated COM port and D2XX ‘direct’ drivers provide DLL application programming interface.

- Visual indication of Tx and Rx traffic via LEDs in the transparent USB connector.

- Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking.

- Data transfer rates from 300 baud to 1 Mbaud.

- Support for FT232R FTDIChip-ID? feature for improved security.

- Low USB bandwidth consumption.

- UHCI / OHCI / EHCI host controller compatible.

- USB 2.0 Full Speed compatible.

- -40°C to +85°C operating temperature range.

- Cable length is 1.80m (6 feet).

- ESD Protection for RS-232 I/O's

±15kV Human Body Model (HBM)

±15kV EN61000-4-2 Air Gap Discharge

±8kV EN61000-4-2 Contact Discharge

- FCC and CE compliant.

- Custom versions available on request (subject to MOQ).