VND9008AJ中文資料意法半導(dǎo)體數(shù)據(jù)手冊PDF規(guī)格書

Features

? AEC-Q100 qualified

? Extreme low voltage operation for deep cold cranking applications (compliant

with LV124, revision 2013)

? General

– Double channel smart high-side driver with current sense analog

feedback

– Very low standby current

– Compatible with 3 V and 5 V CMOS outputs

? Current sense diagnostic functions

– Multiplexed analog feedback of load current with high precision

proportional current mirror

– Overload and short to ground (power limitation) indication

– Thermal shutdown indication

– OFF-state open-load detection

– Output short to VCC detection

– Sense enable/disable

? Protections

– Undervoltage shutdown

– Overvoltage clamp

– Load current limitation

– Self limiting of fast thermal transients

– Configurable latch-off on overtemperature or power limitation with

dedicated fault reset pin

– Loss of ground and loss of VCC

– Reverse battery through self turn-on

– Electrostatic discharge protection

Applications

? Automotive resistive, inductive and capacitive loads

? Protected supply for ADAS systems: radars and sensors

? Automotive headlamps (up to H7)

Description

The device is a double channel high-side driver manufactured using ST proprietary VIPower M0-9 technology and

housed in PowerSSO-16 package. The device is designed to drive 12 V automotive grounded loads through a 3 V

and 5 V CMOS-compatible interface, providing protection and diagnostics.

The device integrates advanced protective functions such as load current limitation, overload active management

by power limitation and overtemperature shutdown with configurable latch-off.

A FaultRST pin unlatches the output in case of fault or disables the latch-off functionality.

A dedicated multifunction multiplexed analog output pin delivers diagnostic functions including high precision

proportional load current sense, in addition to the detection of overload and short circuit to ground, short to VCC

and OFF-state open-load.

A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as

external sense resistor sharing among similar devices.