DESCRIPTION

The 110 °C rated VO618A feature a high current transfer

ratio, low coupling capacitance and high isolation voltage.

These couplers have a GaAs infrared diode emitter, which

is optically coupled to a silicon planar phototransistor

detector, and is incorporated in a plastic DIP-4 package.

The coupling devices are designed for signal transmission

between two electrically separated circuits.

The couplers are end-stackable with 2.54 mm spacing.

Creepage and clearance distances of > 8.0 mm are

achieved with option 6 and 8. This version complies with

IEC 60950 (DIN VDE 0805) for reinforced insulation up to an

operation voltage of 400 VRMS or DC. Specifications subject

to change.

FEATURES

? Operating temperature from -55 °C to +110 °C

? Good CTR linearity depending on forward current

? Isolation test voltage, 5300 VRMS

? High collector emitter voltage, VCEO = 80 V

? Low saturation voltage

? Fast switching times

? Low CTR degradation

? Temperature stable

? Low coupling capacitance

? End stackable, 0.100 (2.54 mm) spacing

? High common mode interference immunity

? Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912