W49L102P-90中文資料華邦電子數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The W49L102 is a 1-megabit, 3.3-volt only CMOS flash memory organized as 64K x 16 bits. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is not required. The unique cell architecture of the W49L102 results in fast program/erase operations with extremely low current consumption (compared to other comparable 3.3-volt flash memory products). The device can also be programmed and erased using standard EPROM programmers.

FEATURES

? Single 3.3-volt operations:

- 3.3-volt Read

- 3.3-volt Erase

- 3.3-volt Program

? Fast Program operation:

- Word-by-Word programming: 50 mS (max.)

? Fast Erase operation: 100 mS (typ.)

? Fast Read access time: 55/70/90 nS

? Endurance: 1K/10K cycles (typ.)

? Twenty-year data retention

? Hardware data protection

? 8K word Boot Block with Lockout protection

? Low power consumption

- Active current: 15 mA (typ.)

- Standby current: 10 mA (typ.)

? Automatic program and erase timing with internal VPP generation

? End of program or erase detection

- Toggle bit

- Data polling

? Latched address and data

? TTL compatible I/O

? JEDEC standard word-wide pinouts

? Available packages: 40-pin TSOP and 44-pin PLCC