The X9259 integrates four digitally controlled potentiometers

(XDCP) on a monolithic CMOS integrated circuit.

The digitally controlled potentiometers are implemented with

a combination of resistor elements and CMOS switches. The

position of the wipers are controlled by the user through the

2-wire bus interface. Each potentiometer has associated with

it a volatile Wiper Counter Register (WCR) and four nonvolatile

Data Registers that can be directly written to and read by the

user. The content of the WCR controls the position of the wiper.

At power-up, the device recalls the content of the default Data

Registers of each DCP (DR00, DR10, DR20, and DR30) to the

corresponding WCR.

The XDCP can be used as a three-terminal potentiometer or as

a two-terminal variable resistor in a wide variety of

applications including control, parameter adjustments, and

signal processing.

Features

? Four separate potentiometers in one package

? 256 resistor taps–0.4 resolution

? 2-wire serial interface for write, read, and

transfer operations of the potentiometer

? Wiper resistance: 100Ω typical at VCC = 5V

? 4 nonvolatile data registers for each potentiometer

? Nonvolatile storage of multiple wiper positions

? Standby current <5μA max

? VCC: 2.7V to 5.5V operation

? 50kΩ version of total resistance

? Endurance: 100,000 data changes per bit per register

? 100 year data retention

? Single supply version of X9258

? 24 Ld SOIC, 24 Ld TSSOP

? Low power CMOS

? Pb-Free (RoHS compliant)