X9271UV14Z-2.7T1集成電路（IC）的數(shù)字電位計(jì)規(guī)格書PDF中文資料

The X9271 integrates a single, digitally controlled

potentiometer (XDCP?) on a monolithic CMOS integrated

circuit.

The digitally controlled potentiometer is implemented by

using 255 resistive elements in a series array. Between each

element are tap points connected to the wiper terminal

through switches. The position of the wiper on the array is

controlled by the user through the SPI bus interface. The

potentiometer has associated with it a volatile Wiper Counter

Register (WCR) and four nonvolatile data registers that can

be directly written to and read by the user. The contents of

the WCR control the position of the wiper on the resistor

array though the switches. Power-up recalls the contents of

the default data register (DR0) to the WCR.

The XDCP can be used as a three-terminal potentiometer or

as a two-terminal variable resistor in a wide variety of

applications including control, parameter adjustments, and

signal processing.

Features

? 256 Resistor Taps

? SPI Serial Interface for Write, Read, and Transfer

Operations of Potentiometer

? Wiper Resistance, 100Ω typical at VCC = 5V

? 16 Nonvolatile Data Registers

? Nonvolatile Storage of Multiple Wiper Positions

? Power-on Recall; Loads Saved Wiper Position on

Power-up

? Standby Current <3μA Max

? VCC = 2.7V to 5.5V Operation

? 50kΩ End-to-End Resistance

? 100-yr Data Retention

? Endurance: 100,000 Data Changes per Bit per Register

? 14-Lead TSSOP

? Low-power CMOS

? Pb-Free Plus Anneal Available (RoHS Compliant)