X9400WV24Z-2.7集成電路（IC）的數(shù)字電位計規(guī)格書PDF中文資料

DESCRIPTION

The X9400 integrates four digitally controlled

potentiometers (XDCPs) on a monolithic CMOS

integrated circuit.

The digitally controlled potentiometer is implemented

using 63 resistive elements in a series array. Between

each element are tap points connected to the wiper

terminal through switches. The position of the wiper on

the array is controlled by the user through the SPI

serial bus interface. Each potentiometer has

associated with it a volatile Wiper Counter Register

(WCR) and four nonvolatile Data Registers (DR0-3)

that can be directly written to and read by the user.

The contents of the WCR controls the position of the

wiper on the resistor array through the switches.

Power-up recalls the contents of DR0 to the WCR.

The XDCP can be used as a three-terminal

potentiometer or as a two-terminal variable resistor in

a wide variety of applications including control,

parameter adjustments, and signal processing.

FEATURES

? Four potentiometers per package

? 64 resistor taps

? SPI serial interface for write, read, and transfer

operations of the potentiometer

? Wiper resistance, 40? typical at 5V.

? Four non-volatile data registers for each

potentiometer

? Non-volatile storage of multiple wiper position

? Power-on recall. Loads saved wiper position on

power-up.

? Standby current < 1μA max

? System VCC: 2.7V to 5.5V operation

? Analog V+/V–: -5V to +5V

? 10k?, 2.5k? end to end resistance

? 100 yr. data retention

? Endurance: 100,000 data changes per bit per

register

? Low power CMOS

? 24 Ld SOIC and 24 Ld TSSOP

? Pb-free plus anneal available (RoHS compliant)