XAM62A74AUMHAAMB中文資料德州儀器數據手冊PDF規格書

1 Features

Processor Cores:

? Up to Quad Arm? Cortex?-A53 microprocessor

subsystem at up to 1.4 GHz

– Quad-core Cortex-A53 cluster with 512KB L2

shared cache with SECDED ECC

– Each A53 core has 32KB L1 DCache with

SECDED ECC and 32KB L1 ICache with Parity

protection

? Single-core Arm? Cortex?-R5F at up to 800 MHz,

integrated as part of MCU Channel with FFI

– 32KB ICache, 32KB L1 DCache, and 64KB

TCM with SECDED ECC on all memories

– 512KB SRAM with SECDED ECC

? Single-core Arm? Cortex?-R5F at up to 800 MHz,

integrated to support Device Management

– 32KB ICache, 32KB L1 DCache, and 64KB

TCM with SECDED ECC on all memories

? Deep Learning Accelerator based on Single-core

C7x

– C7x floating point, up to 40 GFLOPS, 256-bit

Vector DSP at 1.0 GHz

– Matrix Multiply Accelerator (MMA), up to 2

TOPS (8b) at 1.0 GHz

– 32KB L1 DCache with SECDED ECC and

64KB L1 ICache with Parity protection

– 1.25MB of L2 SRAM with SECDED ECC

? Vision Processing Accelerators (VPAC) with Image

Signal Processor (ISP) and multiple vision assist

accelerators:

– 315 MPixel/s ISP; Up to 5MP @ 60 fps

– Support for 12-bit RGB-IR

– Support for up to 16-bit input RAW format

– Line support up to 4096

– Wide Dynamic Range (WDR), Lens Distortion

Correction (LDC), Vision Imaging Subsystem

(VISS), and Multi-Scalar (MSC) support

? Output color format : 8-bits, 12-bits, and

YUV 4:2:2, YUV 4:2:0, RGB, HSV/HSL

Multimedia:

? Display subsystem

– Single display support

– Up to 2048x1080 @ 60fps

– Up to 165-MHz pixel clock support with

independent PLL

– DPI 24-bit RGB parallel interface

– Supports safety features such as freeze frame

detection and MISR data check

? One Camera Serial interface (CSI-2) Receiver with

4-Lane D-PHY

– MIPI? CSI-2 v1.3 Compliant + MIPI D-PHY 1.2

– Support for 1,2,3 or 4 data lane mode up to 1.5

Gbps per lane

– ECC verification/correction with CRC check +

ECC on RAM

– Virtual Channel support (up to 16)

– Ability to write stream data directly to DDR via

DMA

? Video Encoder/Decoder

– Support for HEVC (H.265) Main profiles at

Level 5.1 High-tier

– Support for H.264 BaseLine/Main/High Profiles

at Level 5.2

– Support for up to 4K UHD resolution

(3840 × 2160)

? Clocking options supporting 240 MPixels/s,

120 MPixels/s, or 60 MPixels/s

? Motion JPEG encode at 416 MPixels/s with

resolutions up to 4K UHD (3840 × 2160)

Memory Subsystem:

? Up to 2.29MB of On-chip RAM

– 64KB of On-Chip RAM (OCRAM) with

SECDED ECC, can be divided into smaller

banks in increments of 32KB for as many as

2 separate memory banks

– 256KB of On-Chip RAM with SECDED ECC in

SMS Subsystem

– 176KB of On-Chip RAM with SECDED ECC in

SMS Subsystem for TI security firmware

– 512KB of On-chip RAM with SECDED ECC in

Cortex-R5F MCU Subsystem

– 64KB of On-chip RAM with SECDED ECC in

Device/Power Manager Subsystem

– 1.25MB of L2 SRAM with SECDED ECC in C7x

Deep Learning Accelerator

? DDR Subsystem (DDRSS)

– Supports LPDDR4

– 32-bit data bus with inline ECC

– Supports speeds up to 3733 MT/s

– Max addressable range of 8GBytes

Functional Safety:

? Functional Safety-Compliant targeted [Industrial]

– Developed for functional safety applications

– Documentation will be available to aid IEC

61508 functional safety system design

– Systematic capability up to SIL 3 targeted

– Hardware Integrity up to SIL 2 targeted

– Safety-related certification

? IEC 61508 by TüV SüD planned

? Functional Safety-Compliant targeted [Automotive]

– Developed for functional safety applications

– Documentation will be available to aid ISO

26262 functional safety system design

– Systematic capability up to ASIL D targeted

– Hardware integrity up to ASIL B targeted

– Safety-related certification

? ISO 26262 by TüV SüD planned

? AEC-Q100 qualified [Automotive]

Security:

? Secure boot supported

– Hardware-enforced Root-of-Trust (RoT)

– Support to switch RoT via backup key

– Support for takeover protection, IP protection,

and anti-roll back protection

? Trusted Execution Environment (TEE) supported

– Arm TrustZone? based TEE

– Extensive firewall support for isolation

– Secure watchdog/timer/IPC

– Secure storage support

– Replay Protected Memory Block (RPMB)

support

? Dedicated Security Controller with user

programmable HSM core and dedicated security

DMA & IPC subsystem for isolated processing

? Cryptographic acceleration supported

– Session-aware cryptographic engine with ability

to auto-switch key-material based on incoming

data stream

? Supports cryptographic cores

– AES – 128-/192-/256-Bit key sizes

– SHA2 – 224-/256-/384-/512-Bit key sizes

– DRBG with true random number generator

– PKA (Public Key Accelerator) to Assist in

RSA/ECC processing for secure boot

? Debugging security

– Secure software controlled debug access

– Security aware debugging

High-Speed Interfaces:

? Integrated Ethernet switch supporting (total 2

external ports)

– RMII(10/100) or RGMII (10/100/1000)

– IEEE1588 (Annex D, Annex E, Annex F with

802.1AS PTP)

– Clause 45 MDIO PHY management

– Packet Classifier based on ALE engine with

512 classifiers

– Priority based flow control

– Time Sensitive Networking (TSN) support

– Four CPU H/W interrupt Pacing

– IP/UDP/TCP checksum offload in hardware

? Two USB2.0 Ports

– Port configurable as USB host, USB peripheral,

or USB Dual-Role Device (DRD mode)

– Integrated USB VBUS detection

General Connectivity:

? 9x Universal Asynchronous Receiver-Transmitters

(UART)

? 5x Serial Peripheral Interface (SPI) controllers

? 6x Inter-Integrated Circuit (I2C) ports

? 3x Multichannel Audio Serial Ports (McASP)

– Transmit and Receive Clocks up to 50 MHz

– Up to 16/10/6 Serial Data Pins across 3x

McASP with Independent TX and RX Clocks

– Supports Time Division Multiplexing (TDM),

Inter-IC Sound (I2S), and Similar Formats

– Supports Digital Audio Interface Transmission

(SPDIF, IEC60958-1, and AES-3 Formats)

– FIFO Buffers for Transmit and Receive (256

Bytes)

– Support for audio reference output clock

? 3x enhanced PWM modules (ePWM)

? 3x enhanced Quadrature Encoder Pulse modules

(eQEP)

? 3x enhanced Capture modules (eCAP)

? General-Purpose I/O (GPIO), All LVCMOS I/O can

be configured as GPIO

? 3x Controller Area Network (CAN) modules with

CAN-FD support

– Conforms w/ CAN Protocol 2.0 A, B and ISO

11898-1

– Full CAN FD support (up to 64 data bytes)

– Parity/ECC check for Message RAM

– Speed up to 8 Mbps

Media and Data Storage:

? 3x Secure Digital? (SD?) (4b+4b+8b) interface

– 1x 8-bit eMMC interface up to HS200 speed

– 2x 4-bit SD/SDIO interface up to UHS-I

– Compliant with eMMC 5.1, SD 3.0, and SDIO

Version 3.0

? 1× General-Purpose Memory Controller (GPMC)

up to 133 MHz

– Flexible 8- and 16-bit Asynchronous Memory

Interface with up to four Chip (22-bit address)

Selects (NAND, NOR, Muxed-NOR, and

SRAM)

– Uses BCH code to support 4-, 8-, or 16-bit ECC

– Uses Hamming code to support 1-bit ECC

– Error Locator Module (ELM)

? Used with the GPMC to locate addresses

of data errors from syndrome polynomials

generated using a BCH algorithm

? Supports 4-, 8-, and 16-bit per 512-

Byte block error location based on BCH

algorithms

? OSPI/QSPI with DDR / SDR support

– Support for Serial NAND and Serial NOR Flash

devices

– 4GBytes memory address support

– XIP mode with optional on-the-fly encryption

Power Management:

? Low-power modes supported by Device/Power

Manager

– Partial IO support for CAN/GPIO/UART wakeup

– DeepSleep : I/O + DDR (suspend to RAM)

– DeepSleep

– MCU Only

– Standby

– Dynamic frequency scaling for Cortex-A53

Boot Options:

? UART

? I2C EEPROM

? OSPI/QSPI Flash

? GPMC NOR/NAND Flash

? SD Card

? eMMC

? USB (host) Mass storage

? USB (device) boot from external host (DFU mode)

? Ethernet

Technology / Package:

? 16-nm FinFET technology

? 18 mm x 18 mm, 0.8-mm pitch full-array, 484-pin

FCBGA (AMB)

2 Applications

? Driver Monitoring System (DMS) / Occupancy Monitoring System (OMS)

? eMirror/Camera Mirror System (CMS)

? Machine Vision Camera

? Barcode scanner

? Front camera system

? Stick up camera / Video doorbell

? Autonomous Mobile Robots (AMR)

3 Description

AM62Ax is an extension of the Sitara? automotive-grade family of heterogeneous Arm? processors with

embedded Deep Learning (DL), Video and Vision Processing acceleration, display interface and extensive

automotive peripheral and networking options. AM62Ax is built for a set of cost-sensitive automotive applications

including driver and in-cabin monitoring systems, next generation of eMirror system, as well as a broad set

of industrial applications in Factory Automation, Building Automation, and other markets. The cost optimized

AM62Ax provides high-performance compute for both traditional and deep learning algorithms at industry

leading power/performance ratios with a high level of system integration to enable scalability and lower costs

for advanced automotive platforms supporting multiple sensor modalities in stand-alone Electronic Control Units

(ECUs).

AM62Ax contains up to four Arm? Cortex?-A53 cores with 64-bit architecture, a Vision Processing Accelerator

(VPAC) with Image Signal Processor (ISP) and multiple vision assist accelerators, Deep Learning (DL) and video

accelerators, a Cortex?-R5F MCU Channel core and a Cortex?-R5F Device Management core. The Cortex-

A53s provide the powerful computing elements necessary for Linux applications as well as the implementation of

traditional vision computing based-algorithms such as driver monitoring. Building on the existing world-class ISP,

TI’s 7th generation ISP includes flexibility to process a broader sensor suite including RGB-InfraRed (RGB-IR),

support for higher bit depth, and features targeting analytics applications. Key cores include the next generation

C7000? DSP from Texas Instruments (“C7x”) with scalar and vector cores, dedicated “MMA” deep learning

accelerator enabling performance up to 2 TOPS within the lowest power envelope in the industry when operating

at the typical automotive worst case junction temperature of 125°C.

The 3-port Gigabit Ethernet switch has one internal port and two external ports with TSN support and can be

used to enable industrial networking options. In addition, an extensive peripherals set is included in AM62Ax

to enable system level connectivity such as USB, MMC/SD, Camera interface, OSPI, CAN-FD and GPMC for

parallel host interface to an external ASIC/FPGA. AM62Ax supports secure boot for IP protection with the built-in

HSM (Hardware Security Module) and also employs advanced power management support for portable and

power-sensitive applications.