XR68C92IP中文資料艾科嘉數據手冊PDF規格書

DESCRIPTION

The XR68C92/192 is a Dual Universal Asynchronous Receiver and Transmitter with 8 (XR68C92) or 16 (XR68C192) bytes of transmit and receive FIFOs. The XR68C92/192 is pin-to-pin and functionally compatible to the XR68C681 and Philips SCC68681 UART with additional features. The operating speed of the receiver and transmitter can be selected independently from a table of twenty four fixed baud rates, a 16X clock derived from a programmable counter/ timer, or an external 1X or 16X clock. The baud rate generator and counter/timer can operate directly from a crystal or from external clock input. The XR68C92/192 provides a power down mode in which the oscillator is stopped but the register contents are retained. The XR68C92/192 is fabricated in an advanced CMOS process to achieve low power and high speed requirements.

FEATURES

? Pin to pin and functionally compatible to XR68C681 and SCC68692

? Full duplex transmit and receive operation

? 8 bytes of transmit/receive FIFOs (XR68C92)

? 16 bytes of transmit/receive FIFOs (XR68C192)

? Programmable character lengths (5, 6, 7, 8)

? Parity, framing, and over run error detection

? Programmable 16-bit timer/counter

? On-chip crystal oscillator

? Single interrupt output with eight selectable interrupting conditions

? External 1X or 16X clock

? Data rate up to 1Mbps

? Independent transmit and receive baud rates from 50bps to 230.4kbps

? 6 General purpose inputs

? 8 General purpose outputs

? TTL compatible inputs, outputs

? 4 Transmit/receive trigger levels

? Watch dog timer

? Multi-drop mode compatible with 8051 nine bit mode

? 3.3 or 5 volts operation

? Loopback modes

? Power down mode