XRT91L32集成電路（IC）的驅(qū)動器接收器收發(fā)器規(guī)格書PDF中文資料

GENERAL DESCRIPTION

The XRT91L32 is a fully integrated SONET/SDH transceiver for SONET/SDH 622.08 Mbps STS-12/ STM-4 or 155.52 Mbps STS-3/STM-1 applications. The transceiver includes an on-chip Clock Multiplier Unit (CMU), which uses a high frequency PhaseLocked Loop (PLL) to generate the high-speed transmit serial clock from a slower external clock reference. It also provides Clock and Data Recovery (CDR) function by synchronizing its on-chip Voltage Controlled Oscillator (VCO) to the incoming serial data stream.

FEATURES

? Targeted for SONET STS-12/STS-3 and SDH STM-4/STM-1 Applications

? Selectable full duplex operation between STS-12/STM-4 standard rate of 622.08 Mbps or STS-3/STM-1 155.52 Mbps

? Single-chip fully integrated solution containing parallel-to-serial converter, clock multiplier unit (CMU), serialto-parallel converter, clock data recovery (CDR) functions, and a SONET/SDH frame and byte boundary detection circuit

? Ability to disable and bypass onchip CDR for external based received reference clock recovery thru Differential LVPECL input pins XRXCLKIP/N

? 8-bit LVTTL parallel data bus paths running at 77.76 Mbps in STS-12/STM-4 or 19.44 Mbps in STS-3/STM-1 mode of operation

? Uses Differential LVPECL or Single-Ended LVTTL CMU reference clock frequencies of either 19.44 MHz or 77.76 MHz for both STS-12/STM-1 or STS-3/STM-1 operations

? Optional use of 77.76 MHz Single-Ended LVTTL input for independent CDR reference clock operation

? Able to Detect and Recover SONET/SDH frame boundary and byte align received data on the parallel bus

? Diagnostics features include LOS monitoring and automatic received data mute upon LOS

? Provides Local, Remote and Split Loop-Back modes as well as Loop Timing mode

? Optional flexibility to re-configure the transmit parallel bus clock output to a clock input and accept timing signal from the framer/mapper device to permit the framer/mapper device time domain to be synchronized with the transceiver transmit timing.

? Meets Telcordia, ANSI, Bellcore TR-NWT-000253 and GR-253-CORE, and G.783 ITU-T jitter requirements

? Operates at 3.3V with 3.3V I/O

? Less than 660mW in STS-3/STM-1 mode or 800mW in STS-12/STM-4 mode Typical Power Dissipation

? Package: 10 x 10 x 2.0 mm 100-pin QFP

APPLICATIONS

? SONET/SDH-based Transmission Systems

? Add/Drop Multiplexers

? Cross Connect Equipment

? ATM and Multi-Service Switches, Routers and Switch/Routers

? DSLAMS

? SONET/SDH Test Equipment

? DWDM Termination Equipment