首頁>74HCT174>規格書詳情

74HCT174集成電路（IC）的觸發器規格書PDF中文資料

廠商型號	74HCT174
參數屬性	74HCT174 封裝/外殼為16-SOIC（0.154"，3.90mm 寬）；包裝為卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶；類別為集成電路（IC）的觸發器；產品描述：IC FF D-TYPE SNGL 6BIT 16SO
功能描述	Hex D-type flip-flop with reset; positive-edge trigger
封裝外殼	16-SOIC（0.154"，3.90mm 寬）
文件大小	255.38 Kbytes
頁面數量	14 頁
生產廠商	Nexperia B.V. All rights reserved
企業簡稱	NEXPERIA【安世】
中文名稱	安世半導體(中國)有限公司官網
原廠標識
數據手冊	下載地址一下載地址二到原廠下載
更新時間	2025-1-27 9:32:00

1. General description

The 74HC174; 74HCT174 are hex positive edge-triggered D-type flip-flops with individual data

inputs (Dn) and outputs (Qn). The common clock (CP) and master reset (MR) inputs load and reset

all flip-flops simultaneously. The D-input that meets the set-up and hold time requirements on the

LOW-to-HIGH clock transition is stored in the flip-flop and appears at the Q output. A LOW on MR

causes the flip-flops and outputs to be reset LOW. Inputs include clamp diodes. This enables the

use of current limiting resistors to interface inputs to voltages in excess of VCC.

2. Features and benefits

? Wide supply voltage range from 2.0 to 6.0 V

? CMOS low power dissipation

? High noise immunity

? Input levels:

? For 74HC174: CMOS level

? For 74HCT174: TTL level

? Six edge-triggered D-type flip-flops

? Asynchronous master reset

? Complies with JEDEC standards

? JESD8C (2.7 V to 3.6 V)

? JESD7A (2.0 V to 6.0 V)

? Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

? ESD protection:

? HBM JESD22-A114F exceeds 2000 V

? MM JESD22-A115-A exceeds 200 V.

? Multiple package options

? Specified from -40 °C to +85 °C and -40 °C to +125 °C.