8V79S680集成電路（IC）的時鐘緩沖器驅(qū)動器規(guī)格書PDF中文資料

Description

The 8V79S680 is a fully integrated, clock and SYSREF signal

fanout buffer for JESD204B applications. It is designed as a

high-performance clock and converter synchronization solution for

wireless base station radio equipment boards with JESD204B

subclass 0, 1, and 2 compliance. The main function of the device

is the distribution and fanout of high-frequency clocks and

low-frequency system reference signals generated by a

JESB204B clock generator such as the IDT 8V19N480, extending

its fanout capabilities and providing additional phase-delay.

The 8V79S680 is optimized to deliver very low phase noise clocks

and precise, phase-adjustable SYSREF synchronization signals

as required in GSM, WCDMA, LTE, LTE-A radio board

implementations. Low-skew outputs, low device-to-device skew

characteristics and fast output rise/fall times help the system

design to achieve deterministic clock and SYSREF phase

relationship across devices.

The device distributes the input clock (CLK) and JESD204B

SYSREF signals (REF) to four fanout channels. In each channel,

both input clock and SYSREF signals are fanned-out to multiple

clock (QCLK) and SYSREF (QREF) outputs. Clock signals can be

frequency-divided in each channel. Configurable phase-delay

circuits are available for both clock and SYSREF signals. The

propagation delays in all signal paths are fully deterministic to

support fixed phase relationships between clock and SYSREF

signals within one device. Clock divider can be bypassed for

low-latency clock paths. The device facilitates synchronization

between frequency dividers within the device and across multiple

devices, removing phase ambiguity introduced in dividers

between power and configuration cycles.

Each channel supports clock frequencies up to 3GHz. In an

alternative configuration, for instance JESD204B subclass 0 and

2, the SYSREF (QREF) outputs can be configured as regular

clock outputs adding additional clock fanout to the device.

All outputs are very flexible in amplitude configuration, output

signal termination and allow both DC and AC coupling. Outputs

can be disabled and powered-down when not used. The SYSREF

output pre-bias feature supports prevention of power-on glitches

and enables AC-coupling of the system synchronization signals.

The device is configured through a 3-wire SPI serial interface. The

device is packaged in a lead-free (RoHS 6) 64-lead VFQFPN

package. The extended temperature range supports wireless

infrastructure, telecommunication and networking end equipment

requirements. The device is a member of the high-performance

clock family from IDT.

Features

? Supports high-speed, low phase noise converter clocks

? Distribution, fanout, phase-delay of clock and SYSREF signals

? Very low output noise floor: -158.8dBc/Hz noise floor

(245.76MHz)

? Supports clock frequencies up to 3GHz, including clock output

frequencies of 983.04MHz, 491.52MHz, 245.76MHz, and

122.88MHz

? 4 output channels with a total of 16 differential outputs,

organized in:

? 8 dedicated clock outputs

? 8 outputs configurable as SYSREF outputs with individual

phase delay stages, or configurable as additional clock

outputs

? Each channel contains:

? Frequency dividers: ÷1, ÷2, ÷4, ÷6, ÷8, ÷12, ÷16

? Clock phase delay circuits

? Clock phase delay circuits

? Clock: delay unit is the clock period; 256 steps

? SYSREF: Configurable precision phase delay circuits:

8 steps of 131ps, 262ps, 393ps, or 524ps

? Flexible differential outputs:

? LVDS/LVPECL configurable

? Amplitude configurable

? Power-down modes for unused outputs

? Supports DC and AC coupling

? QREF (SYSREF) output pre-bias feature to prevent glitches

when turning output on or off

? Supply voltage:

? 3.3V core and signal I/O

? 1.8V Digital control SPI I/O (3.3V-tolerant inputs)

? 64 VFQFPN package (9 × 9 × 0.85 mm)

? Ambient temperature range: -40°C to +85°C