AD9601集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

AD9601屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD9601模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD9601 is a 10-bit monolithic sampling analog-to-digital converter optimized for high performance, low power, and ease of use. The product operates at up to a 250 MSPS conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions, including a track-and-hold (T/H) and voltage reference, are included on the chip to provide a complete signal conversion solution.

FEATURES

SNR = 59.4 dBFS @ fIN up to 70 MHz @ 250 MSPS

ENOB of 9.7 @ fIN up to 70 MHz @ 250 MSPS (?1.0 dBFS)

SFDR = 81 dBc @ fIN up to 70 MHz @ 250 MSPS (?1.0 dBFS)

Excellent linearity

DNL = 0.2 LSB typical

INL = 0.2 LSB typical

CMOS outputs

Single data port at up to 250 MHz

Demultiplexed dual port at up to 2 × 125 MHz

700 MHz full power analog bandwidth

On-chip reference, no external decoupling required

Integrated input buffer and track-and-hold

Low power dissipation

274 mW @ 200 MSPS

322 mW @ 250 MSPS

Programmable input voltage range

1.0 V to 1.5 V, 1.25 V nominal

1.8 V analog and digital supply operation

Selectable output data format (offset binary, twos

complement, Gray code)

Clock duty cycle stabilizer

Integrated data capture clock

APPLICATIONS

Wireless and wired broadband communications

Cable reverse path

Communications test equipment

Radar and satellite subsystems

Power amplifier linearization