AZ1043-04F電路保護的TVS-二極管規格書PDF中文資料

AZ1043-04F屬于電路保護的TVS-二極管。由晶焱科技股份有限公司制造生產的AZ1043-04FTVS - 二極管TVS 二極管是一種半導體器件，可用于限制或阻止特定電壓電平的浪涌。該系列產品使用二極管（只能單向導電的元器件）進行設計。TVS 是 Transient Voltage Suppression/Suppressor（瞬態電壓抑制/抑制器）的首字母縮寫。類型包括轉向（軌至軌）或齊納，具有單向通道、雙向通道、電壓 – 反關態、電壓 – 擊穿、電壓 – 箝位、電流 – 峰值脈沖、功率 – 峰值脈沖和電源線路保護等特征。

Features

ESD Protect for Transition Minimized Differential

Signaling (TMDS) channels

Protects four I/O lines

Provide ESD protection for each line to

IEC 61000-4-2 (ESD) ±15kV (air), ±11kV (contact)

IEC 61000-4-5 (Lightning) 4A (8/20ms)

For operating voltage of 3.3V and below

Ultra low capacitance : 0.45pF typical

Fast turn-on and Low clamping voltage

Array of ESD rated diodes with internal

equivalent TVS (Transient Voltage

Suppression) diode

Simplified layout for HDMI connectors

Solid-state silicon-avalanche and active circuit

triggering technology

Green part

Applications

High Definition Multi-Media Interface (HDMI)

1.3, 1.4 and 2.0 version

DisplayPort interface

SATA and eSATA interface

USB3.0

Digital Visual Interface (DVI)

USB2.0 up to 480Mb/s

IEEE 1394 up to 3.2 Gb/s

Ethernet port: 10/100/1000 Mb/s

Desktop and Notebooks PCs

Consumer Electronics

Set Top Box

DVDRW Players

Graphics Cards

Description

AZ1043-04F is a design which includes ESD

rated diode arrays to protect high speed data

interfaces. The AZ1043-04F has been

specifically designed to protect sensitive

components which are connected to data and

transmission lines from over-voltage caused by

Electrostatic Discharging (ESD).

AZ1043-04F is a unique design which includes

ESD rated, ultra low capacitance steering diodes

and a unique design of clamping cell which is an

equivalent TVS diode in a single package. During

transient conditions, the steering diodes direct

the transient to either the internal ESD line or to

ground line. The internal unique design of

clamping cell prevents over-voltage on the

internal ESD line and on the I/O line, which is

protecting any downstream components.

AZ1043-04F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).