IDT72T2098L10BBI中文資料IDT數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION:

The IDT72T2098/72T20108/72T20118/72T20128 are exceptionally deep, extremely high speed, CMOS First-In-First-Out (FIFO) memories with the ability to read and write data on both rising and falling edges of clock. The device has a flexible x20/x10 Bus-Matching mode and the option to select Single or Double Data clock rates for input and output ports.

FEATURES:

? Choose among the following memory organizations:

IDT72T2098 - 32,768 x 20/65,536 x 10

IDT72T20108 - 65,536 x 20/131,072 x 10

IDT72T20118 - 131,072 x 20/262,144 x 10

IDT72T20128 - 262,144 x 20/524,288 x 10

? Up to 250MHz Operation of Clocks

- 4ns read/write cycle time, 3.2ns access time

? Users selectable input port to output port data rates, 500Mb/s Data Rate

-DDR to DDR

-DDR to SDR

-SDR to DDR

-SDR to SDR

? User selectable HSTL or LVTTL I/Os

? Read Enable & Read Clock Echo outputs aid high speed operation

? 2.5V LVTTL or 1.8V, 1.5V HSTL Port Selectable Input/Ouput voltage

? 3.3V Input tolerant

? Mark & Retransmit, resets read pointer to user marked position

? Write Chip Select (WCS) input enables/disables Write Operations

? Read Chip Select (RCS) synchronous to RCLK

? Programmable Almost-Empty and Almost-Full flags, each flag can default to one of four preselected offsets

? Dedicated serial clock input for serial programming of flag offsets

? User selectable input and output port bus sizing

-x20 in to x20 out

-x20 in to x10 out

-x10 in to x20 out

-x10 in to x10 out

? Auto power down minimizes standby power consumption

? Master Reset clears entire FIFO

? Partial Reset clears data, but retains programmable settings

? Empty and Full flags signal FIFO status

? Select IDT Standard timing (using EF and FF flags) or First Word Fall Through timing (using OR and IR flags)

? Output enable puts data outputs into High-Impedance state

? JTAG port, provided for Boundary Scan function

? 208 Ball Grid array (PBGA), 17mm x 17mm, 1mm pitch

? Easily expandable in depth and width

? Independent Read and Write Clocks (permit reading and writing simultaneously)

? High-performance submicron CMOS technology

? Industrial temperature range (-40°C to +85°C) is available