IDT72T3675L10BBI中文資料IDT數據手冊PDF規格書

DESCRIPTION:

The IDT72T3645/72T3655/72T3665/72T3675/72T3685/72T3695/72T36105/72T36115/72T36125 are exceptionally deep, extrememly high speed, CMOS First-In-First-Out (FIFO) memories with clocked read and write controls and a flexible Bus-Matching x36/x18/x9 data flow. These FIFOs offer several key user benefits:

? Flexible x36/x18/x9 Bus-Matching on both read and write ports

? A user selectable MARK location for retransmit

? User selectable I/O structure for HSTL or LVTTL

? Asynchronous/Synchronous translation on the read or write ports

? The first word data latency period, from the time the first word is written to an empty FIFO to the time it can be read, is fixed and short.

? High density offerings up to 9 Mbit

Bus-Matching TeraSync FIFOs are particularly appropriate for network, video, telecommunications, data communications and other applications that need to buffer large amounts of data and match busses of unequal sizes.

FEATURES:

? Choose among the following memory organizations:

IDT72T3645 ― 1,024 x 36

IDT72T3655 ― 2,048 x 36

IDT72T3665 ― 4,096 x 36

IDT72T3675 ― 8,192 x 36

IDT72T3685 ― 16,384 x 36

IDT72T3695 ― 32,768 x 36

IDT72T36105 ― 65,536 x 36

IDT72T36115 ― 131,072 x 36

IDT72T36125 ― 262,144 x 36

? Up to 225 MHz Operation of Clocks

? User selectable HSTL/LVTTL Input and/or Output

? 2.5V LVTTL or 1.8V, 1.5V HSTL Port Selectable Input/Ouput voltage

? 3.3V Input tolerant

? Read Enable & Read Clock Echo outputs aid high speed operation

? User selectable Asynchronous read and/or write port timing

? Mark & Retransmit, resets read pointer to user marked position

? Write Chip Select (WCS) input enables/disables Write operations

? Read Chip Select (RCS) synchronous to RCLK

? Programmable Almost-Empty and Almost-Full flags, each flag can default to one of eight preselected offsets

? Program programmable flags by either serial or parallel means

? Selectable synchronous/asynchronous timing modes for AlmostEmpty and Almost-Full flags

? Separate SCLK input for Serial programming of flag offsets

? User selectable input and output port bus-sizing

- x36 in to x36 out

- x36 in to x18 out

- x36 in to x9 out

- x18 in to x36 out

- x9 in to x36 out

? Big-Endian/Little-Endian user selectable byte representation

? Auto power down minimizes standby power consumption

? Master Reset clears entire FIFO

? Partial Reset clears data, but retains programmable settings

? Empty, Full and Half-Full flags signal FIFO status

? Select IDT Standard timing (using EF and FF flags) or First Word Fall Through timing (using OR and IR flags)

? Output enable puts data outputs into high impedance state

? JTAG port, provided for Boundary Scan function

? Available in 208-pin (17mm x 17mm) or 240-pin (19mm x 19mm) Plastic Ball Grid Array (PBGA)

? Easily expandable in depth and width

? Independent Read and Write Clocks (permit reading and writing simultaneously)

? High-performance submicron CMOS technology

? Industrial temperature range (–40°C to +85°C) is available