1 Features

? Compliant to USB 2.0

? Supports low speed (1.5 Mbps) and full speed (12

Mbps) signaling

? Automatic speed and connection detection

? Supports L1 (sleep) and L2 (suspend) low-power

states

? Supports automatic role reversal for USB On-The-

Go (OTG) and Type-C? Dual Role Port (DRP)

designs

? High CMTI: 100 kV/μs

? VBUS voltage range: 4.25 V to 5.5 V

– 3.3 V internal LDO

? Meets CISPR32 class B emissions limits

? Ambient temperature range: –40°C to +125°C

? 16-SOIC and 16-SSOP package options

? Safety-related certifications:

– 7071-VPK VIOTM and 2121-VPK VIORM

(Reinforced and Basic Options) per DIN EN

IEC 60747-17 (VDE 0884-17)

– 5000-VRMS isolation for 1 minute per UL 1577

– IEC 62368-1, IEC 60601-1 and IEC 61010-1

certifications

– CQC, TUV and CSA certifications

– 16-SOIC certifications complete; 16-SSOP

certifications planned

2 Applications

? USB Hub, Host, Peripheral and Cable Isolation

? Medical

? Factory automation

? Motor drives

? Grid infrastructure

? Power delivery

3 Description

ISOUSB111 is a galvanically-isolated USB 2.0

compliant repeater supporting low speed (1.5 Mbps)

and full speed (12 Mbps) signaling rates. The

device supports automatic connect and speed

detection, reflection of pull-ups/pull-downs, and link

power management allowing drop-in USB hub, host,

peripheral and cable isolation. The device also

supports automatic role reversal - if after disconnect,

a new connect is detected on the Upstream facing

port, then the Upstream and Downstream port

definitions are reversed. This feature enables the

device to support USB On-The-Go (OTG) and Type-C

Dual Role Port (DRP) implementations. This device

uses a silicon dioxide (SiO2) insulation barrier with a

withstand voltage of up to 5000 VRMS and a working

voltage of 1500 VRMS. Used in conjunction with

isolated power supplies, the device protects against

high voltage, and prevents noise currents from the

bus from entering the local ground. The ISOUSB111

device is available for both basic and reinforced

isolation (see Reinforced and Basic Isolation Options).

It supports a wide ambient temperature range of

–40°C to +125°C. The device is available in the

standard SOIC-16 (16-DW) package and a smaller

SSOP-16 (16-DWX) package.

ISOUSB111DWR屬于集成電路（IC） > 信號緩沖器、中繼器、分離器。美國德州儀器公司制造生產的ISOUSB111DWR信號緩沖器、中繼器、分離器信號緩沖器、中繼器和分離器系列中的產品適用于遠距離電氣互連或電纜系統(tǒng)的數(shù)字信息傳輸。所有實際互連系統(tǒng)都具有非理想特性，該系列產品主要用于解決數(shù)字信息傳輸過程中因此造成的模擬問題。此外，還有其他功能，例如不同物理接口樣式之間的轉換和多路復用。