首頁>K246A-DL006P-2AT1A>規格書詳情
K246A-DL006P-2AT1A中文資料宏發科技數據手冊PDF規格書
K246A-DL006P-2AT1A規格書詳情
Application Notes
1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply.
2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should be 50ms minimum to ensure a proper change of state. DO NOT energize both T1 and T3 at the same time on a Dual Coil or energize the coil for longer than 1 minute (damage to the coil could occur).
3. Applying excessive heat to the relay terminals (soldering or welding) can cause damage to the internal structure of the relay and should be avoided.
4. Moving or bending the terminals can cause damage to the internal structure of the relay and should be avoided.
5. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
FUJI/富士電機 |
23+ |
NA/ |
3260 |
原裝現貨,當天可交貨,原型號開票 |
詢價 | ||
NA |
8560 |
一級代理 原裝正品假一罰十價格優勢長期供貨 |
詢價 | ||||
FUJI |
2023+ |
TO-220F |
80000 |
一級代理/分銷渠道價格優勢 十年芯程一路只做原裝正品 |
詢價 | ||
FUJI |
TO-3P |
68900 |
原包原標簽100%進口原裝常備現貨! |
詢價 | |||
TOSHIBA/東芝 |
22+ |
TO-92 |
64900 |
原裝進口現貨支持實單 |
詢價 | ||
TOSHIBA |
6000 |
面議 |
19 |
TO-92 |
詢價 | ||
東芝 |
24+ |
TO-92 |
12000 |
詢價 | |||
FUJI |
24+ |
TO-220F |
16800 |
絕對原裝進口現貨,假一賠十,價格優勢!? |
詢價 | ||
FUJI/富士電機 |
22+ |
TO-3P |
25000 |
只做原裝進口現貨,專注配單 |
詢價 | ||
TOSHIBA/東芝 |
23+ |
TO-92 |
13000 |
原廠授權一級代理,專業海外優勢訂貨,價格優勢、品種 |
詢價 |
