General description

The NTS0308E is an 8-bit, dual supply translating transceiver family with auto direction

sensing, that enables bidirectional voltage level translation. It features eight 1-bit inputoutput ports (A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 0.95 V and 3.6 V. VCC(B) can be supplied at any voltage between 1.65 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (0.95 V, 1.2 V, 1.8 V, 2.5 V, 3.3V and 5.0 V). VCC(A) must be ≤ VCC(B) to ensure proper operation.

Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state.

Features and benefits

? Wide supply voltage range:

– VCC(A): 0.95 V to 3.6 V and VCC(B): 1.65 V to 5.5 V; VCC(A) must be ≤ VCC(B)

? No power-sequencing required

? Maximum data rate

– Open-drain: 2 Mbps

– Push-pull: 20 Mbps

? Longer one-shot pulse for driving larger capacitive loads with much reduced ringing

and overshoot

? A-side and OE inputs accept voltages up to 3.6 V and are 3.6 V tolerant

? B-side inputs accept voltages up to 5.5 V and are 5.5 V tolerant

? ESD protection:

– IEC 61000-4-2 Class 4, 8 kV contact for B-side port

– HBM JESD22-A114E Class 2 exceeds 2000 V for both ports

– CDM JESD22-C101E exceeds 1000 V for both ports

? Latch-up performance exceeds 100 mA per JESD 78B Class II

? Package options: TSSOP20

? Specified from -40 °C to +125 °C

Applications

? I2C/SMBus, UART

? GPIO

NTS0308E屬于集成電路（IC） > 轉換器，電平移位器。恩智浦半導體公司制造生產的NTS0308E轉換器，電平移位器邏輯轉換器或電平移位器 IC 可用于在數字邏輯設備之間傳遞信息，這些設備可在不同/不兼容的供電電壓下工作，或可實現不同的信令方式。例如，可以將需要 5 V 電源的數字輸出傳感器連接到具有 3.3 V I/O 電源的 FPGA，或者在 CMOS 或 TTL 等單端信令方式與 PECL 或 LVDS 等差分技術之間進行轉換。