PTPS7H2211DAPTSEP中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Total ionizing dose (TID) characterized to

100krad(Si)

– Radiation hardness assurance availability of

100krad(Si)

? Single-event effects (SEE) characterized

– Single-event latchup (SEL), single-event

burnout (SEB), and single-event gate rupture

(SEGR) immune to linear energy transfer (LET)

= 75MeV-cm2/mg*

– Single-event functional interrupt (SEFI) and

single-event transient (SET) characterized to

LET = 75MeV-cm2/mg*

? Integrated single channel eFuse

? Input voltage range: 4.5V to 14V

? Low on-resistance (RON) of 60mΩ maximum at

25°C and VIN = 12V

? 3.5A maximum continuous switch current

? Low control input threshold aids in use of

1.2, 1.8, 2.5, and 3.3V logic

? Configurable rise time (soft start)

? Reverse current protection (RCP)

? Overvoltage protection (OVP)

? Internal current limit (fast-trip)

? Thermal shutdown

? Ceramic and plastic package with thermal pad

? Available in military (–55°C to 125°C) temperature

range

*See TPS7H2211-SP SEE radiation report for test conditions

and full information

2 Applications

? Satellite electrical power system (EPS)

? Cold sparing power supplies (redundancy)

? Power supply sequencing

? Command and data handling

? Communications payload

? Radiation hardened and tolerant power tree

3 Description

The TPS7H2211 is a single channel eFuse (integrated

FET load switch with additional features) that provides

reverse current protection, overvoltage protection, and

a configurable rise time to minimize inrush current,

soft start. The device contains P-channel MOSFETs

that operate over an input voltage range of 4.5V to

14V and supports a maximum continuous current of

3.5A.

The switch is controlled by an on and off input

(EN), which is capable of interfacing directly with

low-voltage control signals. Overvoltage protection

and soft start are programmable with few external

components through the OVP and SS pins. The

TPS7H2211 is available in a ceramic and plastic

package with an exposed thermal pad allowing

for improved thermal performance. A standard

microcircuit drawing (SMD) is available for the QML

5962R1822001VXC. A vendor item drawing (VID) is

available for the -SEP variant, V62/23609.