SST26VF032B-104VSLASHMF中文資料微芯科技數(shù)據(jù)手冊PDF規(guī)格書

Product Description

The Serial Quad I/O? (SQI?) family of Flash memory

devices features a six-wire, 4-bit I/O interface that allows for

low-power, high-performance operation in a low pin-count

package. SST26VF032B/032BA also support full command-

set compatibility to traditional Serial Peripheral Interface

(SPI) protocol. System designs using SQI Flash

devices occupy less board space and ultimately lower

system costs.

All members of the 26 Series, SQI family are manufactured

with proprietary, high-performance CMOS SuperFlash?

technology. The split-gate cell design and thick-oxide tunneling

injector attain better reliability and manufacturability

compared with alternate approaches.

Features

? Single Voltage Read and Write Operations:

- 2.7V-3.6V or 2.3V-3.6V

? Serial Interface Architecture:

- Nibble-wide multiplexed I/O’s with SPI-like serial

command structure

- Mode 0 and Mode 3

- x1/x2/x4 Serial Peripheral Interface (SPI) Protocol

? High-Speed Clock Frequency:

- 2.7V-3.6V: 104 MHz maximum

- 2.3V-3.6V: 80 MHz maximum

? Burst Modes:

- Continuous linear burst

- 8/16/32/64 Byte linear burst with wrap-around

? Superior Reliability:

- Endurance: 100,000 Cycles (minimum)

- Greater than 100 years Data Retention

? Low-Power Consumption:

- Active Read current: 15 mA (typical @ 104 MHz)

- Standby Current: 15 μA (typical)

? Fast Erase Time:

- Sector/Block Erase: 18 ms (typ), 25 ms

(maximum)

- Chip Erase: 35 ms (typical), 50 ms (maximum)

? Page-Program:

- 256 bytes per page in x1 or x4 mode

? End-of-Write Detection:

- Software polling BUSY bit in STATUS register

? Flexible Erase Capability:

- Uniform 4-Kbyte sectors

- Four 8-KByte top and bottom parameter overlay

blocks

- One 32-Kbyte top and bottom overlay block

- Uniform 64-Kbyte overlay blocks

? Write-Suspend:

- Suspend Program or Erase operation to access

another block/sector

? Software Reset (RST) mode

? Software Write Protection:

- Individual-Block Write Protection with permanent

lock-down capability

- 64-Kbyte blocks, two 32-Kbyte blocks, and

eight 8-Kbyte parameter blocks

- Read Protection on top and bottom 8-Kbyte

parameter blocks

? Security ID:

- One-Time Programmable (OTP) 2-KByte, Secure ID:

- 64-bit unique, factory preprogrammed identifier

- User-programmable area

? Temperature Range:

- Industrial: -40°C to +85°C

- Industrial Plus: -40°C to +105°C

- Extended: -40°C to +125°C

? Automotive AEC-Q100 Grade 1, Grade 2 and

Grade 3

? Packages Available:

- 8-contact WDFN (6 mm x 5 mm)

- 8-lead SOIJ (5.28 mm)

- 24-ball TBGA (6 mm x 8 mm)

? All Devices are RoHS Compliant