TPSM83101中文資料德州儀器數據手冊PDF規格書

1 Features

? 1.6-V to 5.5-V input voltage range

– Device input voltage > 1.65 V for start-up

? 1.2-V to 5.5-V output voltage range

? High output current capability, 3-A peak switch

current

– 1.5-A output current for VIN ≥ 3 V, VOUT = 3.3 V

– 1.2-A output current for VIN ≥ 2.7 V, VOUT = 3.3

V

? Active output discharge (TPSM83101 only)

? High efficiency over the entire load range

– 8-μA typical quiescent current

– Automatic power save mode and forced PWM

mode

? Peak current buck-boost mode architecture

– Seamless mode transition

– Forward and reverse current operation

– Start-up into pre-biased outputs

– Fixed-frequency operation with 2-MHz

switching

? Safety and robust operation features

– Overcurrent protection and short-circuit

protection

– Integrated soft start with active ramp adoption

– Overtemperature protection and overvoltage

protection

– True shutdown function with load disconnect

– Forward and backward current limit

? Small solution size

– MicroSiP? power module with integrated

inductor

– 2.0-mm × 2.6-mm × 1.2-mm 8-pin μSiP

package

? Create a custom design using the TPSM83100

and TPSM83101 with the WEBENCH? Power

Designer

2 Applications

? Voltage stabilizer (datacom, optical modules,

cooling/heating)

? System pre-regulator (smartphone, tablet,

terminal, telematics)

? Point-of-load regulation (wired sensor, port/cable

adapter, and dongle)

? Fingerprint, camera sensors (electronic smart lock,

IP network camera)

? RF amplifier supply (smart sensors)

3 Description

The TPSM83100 and TPSM83101 are constant

frequency peak current mode control buck-boost

MicroSiP? power modules optimized for small

solution size and high efficiency. The power modules

integrate an inductor to simplify design, reduce

external components and save PCB area. The device

has a 3-A peak current limit (typical) and 1.6-V

to 5.5-V input voltage range. The TPSM83100 and

TPSM83101 provide a power supply solution for

system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPSM83100 and

TPSM83101 automatically operate in boost, buck, or

in 3-cycle buck-boost mode when the input voltage

is approximately equal to the output voltage. The

transitions between modes happen at a defined

duty cycle and avoid unwanted toggling within the

modes to reduce output voltage ripple. 8-μA quiescent

current and power save mode power enable the

highest efficiency for light to no-load conditions.