Features

? Dual channel level shift and repeater for

SDA/SCL Lines in I2C Applications and SMBus

Compatible

? Support multi-mode: Standard-mode (SM), Fastmode (FM), and Fast-mode Plus (FM+)

? Open-Drain I2C Input/Output

? Latching free operation

? Allows Voltage-Level Translation Between

? VREF1 range 0.8 V to 5.5 V

? VREF2 range 2.2 V to 5.5 V

? 5 V tolerant I2C-bus and enable pins

? High-impedance SCL1, SDA1, SCL2 and SDA2

pins for EN = LOW

? Support Low level output current up to 30 mA

? Latch-Up performance exceeds 600 mA

? ESD Protection:

? 7000-V Human-Body Model

? 1500-V Charged-Device Model

Applications

? I

2C, SMBus, PMBus, MDIO, UART, Low-Speed

SDIO, GPIO, and Other Two-Signal Interfaces

? Servers/Storages

? Routers (Telecom Switching Equipment)

? Personal Computers/Consumer handsets

? Industrial Automation

Description

The TPT29617A device is a dual channel I2C level

shift and repeater function with an enable (EN) input,

and work from 0.8 V to 5.5 V VREF1 and 2.2 V to 5.5 V

VREF2.

The SCL1 and SDA1 I/O are connected to the SCL2

and SDA2 I/O, will allow bidirectional data flow

between ports. If EN is low, the translator switch is off,

and a high-impedance state exists between ports to

isolate both sides.

Dual channel, bidirectional buffer isolates

capacitance and allows 540 pF on either side of the

device at 1 MHz and up to 4000 pF at lower speeds.

TPT29617A is available in SOP8 and MSOP8

package, and is characterized from ?40°C to +125°C.