AD9628BCPZ-125集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

AD9628BCPZ-125屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD9628BCPZ-125模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD9628 is a monolithic, dual-channel, 1.8 V supply, 12-bit, 125 MSPS/105 MSPS analog-to-digital converter (ADC). It features a high performance sample-and-hold circuit and onchip voltage reference.

The product uses multistage differential pipeline architecture with output error correction logic to provide 12-bit accuracy at 125 MSPS data rates and to guarantee no missing codes over the full operating temperature range.

FEATURES

1.8 V analog supply operation

1.8 V CMOS or LVDS outputs

SNR = 71.2 dBFS @ 70 MHz

SFDR = 93 dBc @ 70 MHz

Low power: 101 mW/channel @ 125 MSPS

Differential analog input with 650 MHz bandwidth

IF sampling frequencies to 200 MHz

On-chip voltage reference and sample-and-hold circuit

2 V p-p differential analog input

DNL = ±0.25 LSB

Serial port control options

Offset binary, Gray code, or twos complement data format

Optional clock duty cycle stabilizer

Integer 1-to-8 input clock divider

Data output multiplex option

Built-in selectable digital test pattern generation

Energy-saving power-down modes

Data clock out with programmable clock and data

alignment

APPLICATIONS

Communications

Diversity radio systems

Multimode digital receivers

GSM, EDGE, W-CDMA, LTE,

CDMA2000, WiMAX, TD-SCDMA

I/Q demodulation systems

Smart antenna systems

Broadband data applications

Battery-powered instruments

Hand-held scope meters

Portable medical imaging

Ultrasound

Radar/LIDAR