QL2009-2PQ208I中文資料ETC數(shù)據(jù)手冊PDF規(guī)格書

[QuickLogic]

PRODUCT SUMMARY

The QL2009 is a 9,000 usable ASIC gate,16,000 usable PLD gate member of the pASIC 2 family of FPGAs. pASIC 2 FPGAs employ a unique combination of architecture, technology, and software tools to provide high speed, high usable density, low price, and flexibility in the same devices. The flexibility and speed make pASIC 2 devices an efficient and high performance silicon solution for designs described using HDLs such as Verilog and VHDL, as well as schematics.

FEATURES

Ultimate Verilog/VHDL Silicon Solution

- Abundant, high-speed interconnect eliminates manual routing

- Flexible logic cell provides high efficiency and performance

- Design tools produce fast, efficient Verilog/VHDL synthesis

Speed, Density, Low Cost and Flexibility in One Device

- 16-bit counter speeds exceeding 200 MHz

- 9,000 usable ASIC gates, 16,000 usable PLD gates, 225 I/Os

- 3-layer metal ViaLink? process for small die sizes

- 100 routable and pin-out maintainable

Advanced Logic Cell and I/O Capabilities

- Complex functions (up to 16 inputs) in a single logic cell

- High synthesis gate utilization from logic cell fragments

- Full IEEE Standard JTAG boundary scan capability

- Individually-controlled input/feedback registers and OEs on all I/O pins

Other Important Family Features

- 3.3V and 5.0V operation with low standby power

- I/O pin-compatibility between different devices in the same packages

- PCI compliant (at 5.0V), full speed 33 MHz implementations

- High design security provided by security fuses

Total of 225 I/O Pins

- 217 bidirectional input/output pins, PCI-compliant at 5.0V in -1/-2 speed grades

- 4 high-drive input-only pins

- 4 high-drive input/distributed network pins

Four Low-Skew (less than 0.5ns) Distributed Networks

- Two array networks available to logic cell flip-flop clock, set, and reset - each driven by an input-only pin

- Two global clock/control networks available to F1 logic input, and logic cell flip-flop clock, set, reset; input and I/O register clock, reset, enable; and output enable controls - each driven by an input-only pin, or any input or I/O pin, or any logic cell output or I/O cell feedback

High Performance

- Input + logic cell + output delays under 6 ns

- Datapath speeds exceeding 225 MHz

- Counter speeds over 200 MHz